1.刷鍍厚(5u”以上)金接頭一定要跟.
2.停機放料員必須用紅色膠紙繞于端子上做記號.
3.端子上線前放料員要拉出1—2米來檢查.
4.放料處素材接頭需重結.
5.盤子上多余的標簽需撕掉.
6.外泡端子后,要將外泡現場打掃干凈.
7.自主檢查表與留樣表必須如實填寫.
8.保持放料區無紙屑.端子.
9.放料區桌椅必須擺放整齊.
10.放料區水盤必須整潔干凈.
11.出現斷線停機,應立即通知組長并拿銅絲或料帶去接.
12.不可在窗體是亂涂亂畫或做其它用途.
![{$r[title ]}](/Uploads/Images/20230904e557049335b899c12bb4a0ef6199b6ec.jpg)
![{$r[title ]}](/Uploads/Images/202309046f1b3f823bde2d4df5b4ee103f232385.jpg)
![{$r[title ]}](/Uploads/Images/20230904f5e918cc35cbb1c65d8f7bfb8e75ab5b.jpg)
![{$r[title ]}](/Uploads/Images/202309042d01bffab7e231dcc30ea1371dd0d0b2.jpg)
